Star69
2001-03-31, 05:55 AM
之前POST的由於站長把html語法關閉了~整個排版都跑掉了~重新再post一次
這就是功能全開後的畫面
多了
25. IP Routing Policy Setup
26. Schedule Setup
這兩項以及
24. System Maintenance
裡面多了一個
10. Time and Date Setting
其中像是 排程 路由表 之類的設定要是你設定後想清除哪一個
就在 Edit Name= N/A 這邊打個 問號? 再按Enter就可刪除變回原本空白
Menu 24.2.1 - System Maintenance - Information
Name: cht
Routing: BRIDGE
ZyNOS S/W Version: V2.50(AF.1) | 10/6/2000
Standard: Multi-Mode
LAN
Ethernet Address: 00:a0:c5:2a:1a:37
IP Address: 192.168.10.1
IP Mask: 255.255.255.0
DHCP: None
-------------------------------------------------------------------------
ZyNOS Version: V2.50(AF.1) | 10/6/2000 11:04:43
Press any key to enter debug mode within 3 seconds.
.............................
Enter Debug Mode
ATDO06008000,E8852
Starting XMODEM download...
Total 952704 bytes received
OK
atur
Starting XMODEM upload (CRC mode)....
CCCCCC
-------------------------------------------------------------------------
成功主畫面
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
Prestige 642 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
3. Ethernet Setup 22. SNMP Configuration
4. Internet Access Setup 23. System Password
24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup 99. Exit
Enter Menu Selection Number:
-------------------------------------------------------------------------
網路連線設定畫面
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
Service Name=
My Login=
My Password= ********
Single User Account= Yes
IP Address Assignment= Static
IP Address= 0.0.0.0
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
系統設定畫面
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
Enter Menu Selection Number:
-------------------------------------------------------------------------
系統網路對時設定畫面
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 46 : 23
New Time (hh:mm:ss): 00 : 46 : 20
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
時間排程設定畫面
Menu 26 - Schedule Setup
Schedule Schedule
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
時間排程細項設定畫面
Menu 26.1 Schedule Set Setup
Active= Yes
Start Date(yyyy-mm-dd)= 2000 - 01 - 01
How Often= Once
Once:
Date(yyyy-mm-dd)= 2000 - 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time(hh:mm)= 00 : 00
Duration(hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
IP路由表內容設定畫面
Menu 25 - IP Routing Policy Setup
Policy Policy
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
IP路由表內容畫面
Menu 25.1 - IP Routing Policy Setup
# A Criteria/Action
- - --------------------------------------------------------------------------
1 N __________________________________________________________________________
__________________________________________________________________________
2 N __________________________________________________________________________
__________________________________________________________________________
3 N __________________________________________________________________________
__________________________________________________________________________
4 N __________________________________________________________________________
__________________________________________________________________________
5 N __________________________________________________________________________
__________________________________________________________________________
6 N __________________________________________________________________________
__________________________________________________________________________
Enter Policy Rule Number (1-6) to Configure:
-------------------------------------------------------------------------
IP路由表內容設定畫面
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= No
Criteria:
IP Protocol = 0
Type of Service= Don't Care Packet length= 0
Precedence = Don't Care Len Comp= N/A
Source:
addr start= 0.0.0.0 end= N/A
port start= N/A end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= N/A end= N/A
Action= Matched
Gateway addr = 0.0.0.0 Log= No
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
這就是功能全開後的畫面
多了
25. IP Routing Policy Setup
26. Schedule Setup
這兩項以及
24. System Maintenance
裡面多了一個
10. Time and Date Setting
其中像是 排程 路由表 之類的設定要是你設定後想清除哪一個
就在 Edit Name= N/A 這邊打個 問號? 再按Enter就可刪除變回原本空白
Menu 24.2.1 - System Maintenance - Information
Name: cht
Routing: BRIDGE
ZyNOS S/W Version: V2.50(AF.1) | 10/6/2000
Standard: Multi-Mode
LAN
Ethernet Address: 00:a0:c5:2a:1a:37
IP Address: 192.168.10.1
IP Mask: 255.255.255.0
DHCP: None
-------------------------------------------------------------------------
ZyNOS Version: V2.50(AF.1) | 10/6/2000 11:04:43
Press any key to enter debug mode within 3 seconds.
.............................
Enter Debug Mode
ATDO06008000,E8852
Starting XMODEM download...
Total 952704 bytes received
OK
atur
Starting XMODEM upload (CRC mode)....
CCCCCC
-------------------------------------------------------------------------
成功主畫面
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
Prestige 642 Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
3. Ethernet Setup 22. SNMP Configuration
4. Internet Access Setup 23. System Password
24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup 99. Exit
Enter Menu Selection Number:
-------------------------------------------------------------------------
網路連線設定畫面
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
Service Name=
My Login=
My Password= ********
Single User Account= Yes
IP Address Assignment= Static
IP Address= 0.0.0.0
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
系統設定畫面
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
Enter Menu Selection Number:
-------------------------------------------------------------------------
系統網路對時設定畫面
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 46 : 23
New Time (hh:mm:ss): 00 : 46 : 20
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
時間排程設定畫面
Menu 26 - Schedule Setup
Schedule Schedule
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Schedule Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
時間排程細項設定畫面
Menu 26.1 Schedule Set Setup
Active= Yes
Start Date(yyyy-mm-dd)= 2000 - 01 - 01
How Often= Once
Once:
Date(yyyy-mm-dd)= 2000 - 01 - 01
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time(hh:mm)= 00 : 00
Duration(hh:mm)= 00 : 00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
IP路由表內容設定畫面
Menu 25 - IP Routing Policy Setup
Policy Policy
Set # Name Set # Name
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 _______________ 8 _______________
3 _______________ 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Policy Set Number to Configure= 0
Edit Name= N/A
Press ENTER to Confirm or ESC to Cancel:
-------------------------------------------------------------------------
IP路由表內容畫面
Menu 25.1 - IP Routing Policy Setup
# A Criteria/Action
- - --------------------------------------------------------------------------
1 N __________________________________________________________________________
__________________________________________________________________________
2 N __________________________________________________________________________
__________________________________________________________________________
3 N __________________________________________________________________________
__________________________________________________________________________
4 N __________________________________________________________________________
__________________________________________________________________________
5 N __________________________________________________________________________
__________________________________________________________________________
6 N __________________________________________________________________________
__________________________________________________________________________
Enter Policy Rule Number (1-6) to Configure:
-------------------------------------------------------------------------
IP路由表內容設定畫面
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= No
Criteria:
IP Protocol = 0
Type of Service= Don't Care Packet length= 0
Precedence = Don't Care Len Comp= N/A
Source:
addr start= 0.0.0.0 end= N/A
port start= N/A end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= N/A end= N/A
Action= Matched
Gateway addr = 0.0.0.0 Log= No
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel: