請問大家
都如何最佳化您的 Cisco 677 呢?????
可以 Post 出來讓大家參考嗎?
或用 tftp 把 config file dump 出來
貼出來讓大家參考一下嗎?

======================我的 config file
[[ IP Routing = Section Start ]]
IP Port Address = 00, 202.xx.xx.xx
IP Port Address Mask = 00, 255.255.255.248
IP Default Route for Unnumbered Links = 001, 01, 0
[[ CBOS = Section Start ]]
NSOS 1483 Routing = enabled
NSOS MD5 Enable Password =
NSOS MD5 Root Password =
NSOS MD5 Commander Password =
NSOS Ethernet Speed = 100
[[ ATM WAN Device Driver = Section Start ]]
ATM WAN Virtual Connection Parms = 00, 0, 33, 0
ATM WAN Cell Scrambling = disabled
[[ WEB = Section Start ]]
WEB = disabled
[[ TFTP = Section Start ]]
TFTP = enabled
TFTP Client = 202.xx.xx.xx[[ DHCP = Section Start ]]
DHCP Server = enabled
DHCP Server Pool DNS = 00, 202.xx.xx.xx
DHCP Server Pool IP = 00, 202.xx.xx.xx
DHCP Server Pool Netmask = 00, 255.255.255.248
DHCP Server Pool Gateway = 00, 202.xx.xx.xx
[[ SNMP Management = Section Start ]]
SNMP = enabled
SNMP Manager List = 202.xx.xx.xx, public, read, trappable, all;
================我的 config file

贊助商連結

建議你把tftp disable, 否果後果會蠻慘的.
原因是, 如果你是固接式, 而我又知道你的ip, 我就可以利用tftp把你的ATU-R的版本給更換了. 因為目前中華電信有些是利用遠端更新軟體的方式, 不用跑現場...