我的電腦不知何解在重灌Windows之後就頻頻死機，並有藍畫面：

A problem has been detected and windows has been shut down to prevent damage to your computer.

If this is the first time you've seen this stop error screen, restart your computer. If this screen appear again, follow these steps:

check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapter.

Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced StartUp options, and then select Safe Mode.

(一堆古怪符號，看不懂)

*** STOP: 0X0000008E (0XC0000005, 0XBF827D5e,0XF2C6631C, 0X00000000)

*** win32k.sys - Address BF827D5E base at BF800000, DataStamp 3b7de698

Beginning dump of physical memory
Dumping physical memory to disk: 81


我看不懂，究竟我該怎樣做？

贊助商連結

把『0X0000008E』當Keyword就可以找出一堆答案了

應該跟 Ram 有關係 , 請 Check Ram Module

http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q315335

CAUSE:
This behavior may occur if one of the following conditions is true:
One or more of the random access memory (RAM) modules that are installed on your computer are faulty.
The RAM configuration is incompatible with Windows XP.

RESOLUTION:
To troubleshoot this behavior, follow these steps:
Remove some of the memory modules that are installed on the computer. Leave at least the RAM that is required for the computer to start and run Windows XP.

The recommended RAM to run Windows XP is 128 megabytes (MB). The minimum is 64 MB, and the maximum is 4 gigabytes.

For example, if two 256-MB memory modules are installed on your computer, remove one of the memory modules.
Restart your computer, and then run the Setup program:
Insert the Windows XP Setup CD-ROM in the CD-ROM drive, start the computer, and then click OK to select the first option screen to install a copy of Windows XP.
Click Accept, and then follow the instructions on the screen to complete the Windows XP installation.
If you again receive the error message that is mentioned in the "Symptoms" section, go to step 4.
Remove a different memory module, or install the RAM in a different memory slot.
Restart your computer, and then rerun Setup.

You may have to restart your computer several times to identify the specific memory modules that are not working correctly.

是不是換了條RAM就得？
我只是用一條256MB，換了後都照樣彈出藍畫面。
我英文不甚好，勞煩各位幫忙了。
:( :confused:

記憶體測試工具→Memtest86 (http://www.memtest86.com/)