【求助】PCI IP分享器+MSN+XP 還是解決不了

顯示結果從第 1 筆 到 4 筆,共計 4 筆
  1. #1
    半生不熟
    註冊日期
    2001-07-29
    討論區文章
    35

    【求助】PCI IP分享器+MSN+XP 還是解決不了

    大家好
    這個問題我有先看了所有站內的相關討論 但是還是無法傳檔 或語音交談
    我的狀況如下
    IP分享器 : PCI BRL-04A 設 192.168.1.1
    第一台電腦 : WinXP, 我設192.168.1.2
    第二台, 第三台電腦 : Win2000,我設 192.168.1.3 192.168.1.4
    三台都有裝MSN最新版 XP當然是用Windows messenger 4.6
    網卡都是REALTEK
    非常奇怪的事 兩台win2000 都可以和其他人用msn傳檔
    唯讀 win xp這台不行
    我看大家的討論已經是過以下方法都不行
    1. 從ip分享器調整 dmz 原本設 192.168.1.0 win2000那兩台就已經可以傳了
    就算改成 192.168.1.1 或 192.168.1.2 那兩台win2000都不受影響 但是xp這台都不行
    2. 我沒有裝任和防火牆軟體
    3. 區域網路連線部分的防火牆我確定有關掉 - 根本也沒開過
    4. 防毒軟體我用pcc2002 但是我關掉後或反安裝後一樣不行
    5. messenger內他有顯示我是直接連線到messenger 沒有用防火牆
    6. 以上試任何方法 我都有重新開機 甚至將ip分享器先斷電 都無效
    請問有沒有哪位可以教一下呢
    萬分感激

    小杜



  2. #2
    會員
    註冊日期
    2001-08-02
    討論區文章
    29

    XP 的網路卡只能選擇上 Internet 或 區域網路 二選一
    所以那台恐怕要插兩張網卡了!並且要用 XP 的方式(好像是什麼家庭網路設定 ...精靈)
    總之有個地方可選擇那個要上網,那個要作區域網路(之前有設過,在網上查到的資料)

  3. #3
    -停權中-
    註冊日期
    2002-02-06
    討論區文章
    2,246
    3. 區域網路連線部分的防火牆我確定有關掉 - 根本也沒開過...............麻煩請您看一下這一篇討論http://www.pczone.com.tw/showthread...&threadid=39399

  4. #4
    會員 dkjfso 的大頭照
    註冊日期
    2002-07-08
    討論區文章
    1,519
    一、ip分享器的防火牆軟體更新到最新版本(192.168.1.1進入,看一下說明書),像我的lm-case1042 ip分享器最新的防火牆軟體是1.71版,要到官網下載。

    二、也可以手動設定把傳檔的port打開,同樣是進入ip分享器中,在「由內至外管制」之類的地方,把port6891-6900這10個port accept(下面查到是tcp類型),不要選any。
    如果成功了請回覆一下讓我知道~~還有問題可以再問~~

    下面我附上軟體會使用到的port列表,如果要把某個網路服務擋掉,也同樣只須把port deny就可以了~~

    如果要查詢你電腦正在用到的port,在command line(dos)使用netstat -a 就可以知道了~~下面我附上會軟體會使用到的port列表,如果要把某個網路服務擋掉,也同樣只須把port deny就可以了~~
    如果要查詢你電腦正在用到的port,在command line(dos)使用netstat -a 就可以知道了~~


    UDP 的PORT: (來源不明,僅供參考)


    AIM Talk
    OUT TCP 4099
    IN TCP 5190

    Battlecom
    (Watch Out! Opens a wide port range!)
    IN UDP 2300 - 2400
    IN TCP 2300 - 2400
    IN UDP 47624
    IN TCP 47624

    Buddy Phone
    (only communication. No FTP)
    IN UDP 700 - 701

    Calista IP phone
    OUT TCP 5190
    IN UDP 3000

    CuSeeMe
    (Watch Out! Opens a wide port range!)
    OUT UDP 24032
    IN UDP 1414 [use H.323 protocol if available]
    IN UDP 1424 [use H.323 protocol if available]
    IN TCP 1503
    IN TCP 1720 [use H.323 protocol if available]
    IN UDP 1812 1813
    IN TCP 7640
    IN TCP 7642
    IN UDP 7648
    IN TCP 7648
    IN TCP 7649 7649
    IN UDP 24032
    IN UDP 56800
    OUT UDP 1414 [use H.323 protocol if available]
    OUT UDP 1424 [use H.323 protocol if available]
    OUT TCP 1503
    OUT TCP 1720 [use H.323 protocol if available]
    OUT UDP 1812 1813
    OUT TCP 7640
    OUT TCP 7642
    OUT UDP 7648
    OUT TCP 7648
    OUT TCP 7649
    OUT UDP 56800

    Delta Three PC to Phone
    (Watch Out! Opens a wide port range!)
    IN TCP 12053 [use CuSeeMe protocol if available]
    IN TCP 12083
    IN UDP 12080
    IN UDP 12120
    IN UDP 12122
    IN UDP 24150 - 24179

    Dialpad
    OUT TCP 7175
    IN UDP 51200 51201
    IN TCP 51210
    IN TCP 1584 1585
    OUT TCP 8680 8686

    Dwyco Video Conferencing
    (Watch Out! Opens a wide port range!)
    IN UDP 12000 - 16090
    IN TCP 1024 - 5000
    IN TCP 6700 - 6702
    IN TCP 6880


    Go2Call
    IN UDP 2090 2091
    IN TCP 2090

    H.323 compliant video player,
    NetMeeting 2.0, 3.0, Intel Video Phone
    (Watch Out! Opens a wide port range!)
    (Incoming calls are not possible
    due to NetMeeting assigning ports dynamically.)
    OUT TCP 1720
    IN UDP 1024 65534 [use H.323 protocol if available]
    OUT UDP 1024 65534 [use H.323 protocol if available]
    IN TCP 1024 1502 [use H.323 protocol if available]
    OUT TCP 1024 1502 [use H.323 protocol if available]
    IN TCP 1504 1730 [use H.323 protocol if available]
    OUT TCP 1504 1730 [use H.323 protocol if available]
    IN TCP 1732 65534 [use H.323 protocol if available]
    OUT TCP 1732 65534 [use H.323 protocol if available]
    OUT TCP 1503 1503
    OUT TCP 1731 1731
    IN TCP 1503 1503
    IN TCP 1731 1731

    Hotline Server
    IN TCP 5500 - 5503
    IN UDP 5499
    The TCP Ports enabled are 5500 - 5503 (This is for the standard 5500
    Hotline port)

    If you change the default port, then you must enable the 3 ports after
    it (so if you choose 4000 then you must enable 4000 - 4003)

    The UDP port enabled 5499 is required only if you want to list your
    server on a tracker (the data stream is only outgoing so if you want to
    disable in bound on a firewall it would work fine)

    ICQ
    In ICQ under "Preferences & security", "Preferences" and Connections, click on "I am behind a firewall or proxy" then click on "Firewall Settings". Then select "I don't have a SOCKS Proxy server on my firewall" or "I am using another Proxy server". Click Next. Click "Use the following TCP listen ports for incoming event" and set the TCP ports for 20000 to 20019 for the first user, 20020 to 20039 for the second user, 20040 to 20059 for the third user, etc.

    OUT UDP 4000
    IN TCP 20000 20019 for one user
    OR
    IN TCP 20000 20039 for two users
    OR
    IN TCP 20000 20059 for three users, etc.

    ICUII Client
    (Watch Out! Opens a wide port range!)
    OUT TCP 2019
    IN TCP 2000 2038
    IN TCP 2050 2051
    IN TCP 2069
    IN TCP 2085
    IN TCP 3010 3030
    OUT TCP 2000 2038
    OUT TCP 2050 2051
    OUT TCP 2069
    OUT TCP 2085
    OUT TCP 3010 3030

    ICUII Client (Version 4.xx)
    (Watch Out! Opens a wide port range!)
    IN TCP 1024 - 5000
    IN TCP 2000 - 2038
    IN TCP 2050 - 2051
    IN TCP 2069
    IN TCP 2085
    IN TCP 3010 - 3030
    IN TCP 6700 - 6702
    IN TCP 6880
    IN UDP 12000 - 16090

    Internet Phone
    OUT UDP 22555

    Ivisit
    IN UDP 9943
    IN UDP 56768

    LIVvE
    (For pager file send only)
    IN UDP 8999

    mIRC DCC / IRC DCC
    [mIRC Proxy/Firewall Help page]
    (Watch Out! Opens a wide port range!)
    IN TCP 1024 - 5000

    mIRC Chat
    (The IRC port is usually 6667)
    IN TCP 6660 - 6669

    mIRC IDENT
    IN UDP 113

    MSN Messenger
    (Watch Out! Opens a wide port range!)
    NOTE: Shut off any personal firewall programs such as BlackIce, ZoneAlarm, etc.
    Ports 6891-6900 enable File send,
    Port 6901 is for voice communications
    Allows Voice, PC to Phone, Messages, and Full File transfer capabilities.
    Thnx to Brad King & Bill Finch Jr.
    IN TCP 6891 - 6900
    IN TCP 1863
    IN UDP 1863
    IN UDP 5190
    IN UDP 6901
    IN TCP 6901

    Net2Phone
    OUT UDP 6801
    IN UDP 6801
    One additional UDP and one TCP port in the range of 1 to 30000
    must be mapped. Ports 6802 and 6803 are suggested. These
    ports must be mapped in your firewall, then set in the Net2Phone client
    as follows:
    1) Click on Net2Phone's "Menu" button.
    2) Select "Preferences".
    3) Click on the "Network" tab.
    4) Enter 6802 for the Client TCP Port.
    5) Enter 6803 for the Client UDP Port.

    Pal Talk [support page]
    (Watch Out! Opens a wide port range!)
    IN UDP 2090 [voice]
    IN UDP 2091 [control stream]
    IN TCP 2090 [file transfer]
    IN TCP 2091 [video listening]
    IN TCP 2095 [file transfer- older versions]
    OUT TCP 5001 - 50015 [text messaging]
    OUT TCP 8200 - 8700 [Firewall / network mode group voice]
    OUT UDP 8200 - 8700 [Firewall / network mode group voice]
    OUT UDP 1025 - 2500 [outbound voice & control stream (user configurable)]

    The last 2 UDP outbound ports are usually set in pairs. 1024 - 1025, 1026 - 1027, etc... Most users never have to set these lower two ports. They are dynamically assigned if you leave the lower two boxes set to 0's on the 'paltalk port settings' tab.
    Outbound ports are usually not an issue but are listed here for network users who may need to manually configure for a proxy or NAT server or other hardware device.

    PhoneFree
    (Watch Out! Opens a wide port range!)
    IN UDP 1034 - 1035
    IN UDP 9900 - 9901
    IN TCP 1034 - 1035
    IN TCP 2644
    IN TCP 8000
    This Mapping is needed to hear the audio from the incoming party, outgoing audio would work without it.
    ** According to phonefree the ports you need open are:
    8000 TCP For Server access
    1034 UDP Voice in/out
    1035 TCP Voice in/out
    2644 TCP Personal Communication Center
    I found that port range 9900-9901 UDP is also needed but not mentioned at phonefree support.
    Also shut off any other firewall programs you may have running.

    To make PC-TO-PHONE calls, it seems only UDP port 9900 must be opened (the fewer ports open, the better!).

    Polycom ViaVideo H.323
    IN TCP 3230 - 3235
    IN UDP 3230 - 3235
    NOTE: I needed to set these ports to dial out.
    Also enable on ViaVideo (under H.323 QoS) 'Use Fixed Ports' 3230-3235 TCP & UDP

    Roger Wilco [support page]
    IN TCP 3782
    IN UDP 3782
    IN UDP 3783 [only needed for RW Base station]

    Speak Freely
    IN UDP 2074 - 2076

    Yahoo Messenger Chat
    IN TCP 5000 - 5001

    Yahoo Messenger Phone
    IN UDP 5055


    --------------------------------------------------------------------------------


    Back To Top

    --------------------------------------------------------------------------------
    Audio & Video
    Audiogalaxy Satellite [updated 12/13/00]
    (Watch Out! Opens a wide port range!)
    IN TCP 41000 - 50000
    IN TCP 1117-5190

    Camerades
    IN TCP 2047 2048
    IN UDP 2047 2048

    GNUtella
    IN TCP 6346
    IN UDP 6346

    IStreamVideo2HP
    IN TCP 8076 - 8077
    IN UDP 8076 - 8077

    KaZaA
    IN TCP 1214

    Napster
    OUT TCP 6699
    IN TCP 6699

    QuickTime 4 Server
    IN TCP 6970
    IN UDP 6970 - 7000

    QuickTime 4 Client & RealAudio on Port 554
    (Watch Out! Opens a wide port range!)
    OUT TCP 554
    IN UDP 6970 - 32000

    RealAudio on Port 7070
    OUT TCP 7070
    IN UDP 6970 - 7170

    ShoutCast Server
    IN TCP 8000 - 8005

    Back To Top

    --------------------------------------------------------------------------------
    Games
    Aliens vs. Predator
    (Watch Out! Opens a wide port range!)
    IN UDP 80
    IN UDP 2300 - 2400
    IN UDP 8000 - 8999

    Anarchy Online (BETA)
    IN TCP 7013
    IN TCP 7500 - 7501
    IN UDP 7013
    IN UDP 7500 - 7501

    Asheron's Call [support page] [mapping info]
    OUT UDP 9000, 9004, 9008, 9012
    IN UDP 9000, 9001, 9004, 9005, 9012, 9013
    NOTE! You may also need to open the MSN Game Zone and DX ports

    Black and White
    IN TCP 2611 - 2612
    IN TCP 6667
    IN UDP 6500
    IN UDP 27900

    Blizzard Battlenet
    This allows for -1- machine on the network to take advantage of Blizzard's BattleNet system for playing online games such as Diablo II and StarCraft. The 6112 port is needed in both TCP and UDP for StarCraft and Diablo II, and the 4000 port is needed for Diablo II. No other settings should be needed.
    IN TCP 4000
    IN TCP 6112
    IN UDP 6112

    Bungie.net, Myth, Myth II Server
    IN TCP 3453

    Dark Reign 2
    IN TCP 26214
    IN UDP 26214

    Delta Force (Client and Server)
    OUT UDP 3568
    IN TCP 3100 3999
    OUT TCP 3100 3999
    IN UDP 3100 3999
    OUT UDP 3100 3999


    Delta Force 2
    IN UDP 3568
    IN UDP 3569

    Elite Force
    IN UDP 26000
    IN UDP 27500
    IN UDP 27910
    IN UDP 27960
    NOTE: If the server is behind the same router/firewall as other clients, then all of the clients will have to add "+set net_port 27961," "27962," etc. to their shortcut command lines. Otherwise, they will not be able to use the in-game internet game browser. This is due to the fact that EF uses the same port (27960) for both the client and the server.

    Everquest
    (Watch Out! Opens a wide port range!)
    See this Everquest page for more info
    IN TCP 1024 7000
    IN UDP 1024 6000
    Note: May have to open this last UDP range even wider

    F-16, Mig 29
    IN UDP 3862
    IN UDP 3863

    F-22 Lightning 3
    (Watch Out! Opens a wide port range!)
    IN UDP 3875
    IN UDP 4533
    IN UDP 4534
    IN UDP 4660 - 4670 (for VON)

    F-22 Raptor
    IN UDP 3874, 3875

    Fighter Ace II
    (Watch Out! Opens a wide port range!)
    IN TCP 50000 - 50100
    IN UDP 50000 - 50100

    for DX play also open these ports:
    IN TCP 47624
    IN TCP 2300 - 2400
    IN UDP 2300 - 2400

    Half Life
    IN UDP 6003
    IN UDP 7002
    IN UDP 27010
    IN UDP 27015
    IN UDP 27025

    Half Life Server
    IN UDP 27015

    Heretic II Server
    IN TCP 28910

    Hexen II
    Each computer hosting Hexen II must use a different port number, starting at 26900 and incrementing by 1.

    IN UDP 26900 (for first player)

    KALI
    Each computer using KALI must use a different port number, starting at 2213 and incrementing by 1.

    IN UDP 2213 (for first player)
    IN UDP 6666

    Kohan Immortal Sovereigns
    This allows you to host a Kohan game and have it show
    up on Gamespy, otherwise no one will be able to see your
    game outside of your lan. Only the ICS server can host
    games and have them show up however.
    IN UDP 3855
    IN UDP 17437
    IN TCP 3855
    IN TCP 17437

    Motorhead server
    IN UDP 16000
    IN TCP 16000
    IN TCP 16010 - 16030
    IN UDP 16010 - 16030

    The ports 16010-16030 are ports I specified in the MotorHead dedicated server client ports section. You need to specify client ports so that Motorhead does not assign client ports randomly.

    MSN Game Zone [support page] [DX support page]
    (Watch Out! Opens a wide port range!)
    IN TCP 6667
    IN TCP 28800 - 29000

    for DX play also open these ports:
    IN TCP 47624
    IN TCP 2300 - 2400
    IN UDP 2300 - 2400

    Need for Speed - Porche
    IN UDP 9442

    Need for Speed 3- Hot Pursuit
    IN TCP 1030

    Operation FlashPoint

    TCP 47624 ~ 47624
    TCP 2234 ~ 2234
    BOTH 6073 ~ 6073

    Outlaws
    IN UDP 5310
    IN TCP 5310

    Quake2 (Client and Server)
    IN UDP 27910

    QuakeIII
    Each computer playing QuakeIII must use a different port number, starting at 27660 and incrementing by 1. You'll also need to do the following:

    1. Right click on the QIII icon
    2. Choose "Properties"
    3. In the Target field you'll see a line like "C:\Program Files\Quake III Arena\quake3.exe"
    4. Add the Quake III net_port command to specify a unique communication port for each system. The complete field should look like this: "C:\Program Files\Quake III Arena\quake3.exe" +set net_port 27660
    5. Click OK.
    6. Repeat for each system behind the NAT, adding one to the net_port selected (27660,27661,27662)

    IN UDP 27660 (for first player)

    Rainbow Six (Client and Server)
    OUT TCP 2346
    IN TCP 2346

    Rogue Spear
    OUT TCP 2346
    IN TCP 2346

    Soldier of Fortune
    IN UDP 28910 - 28915

    Starcraft
    IN UDP 6112

    Starfleet Command
    (Watch Out! Opens a wide port range!)
    IN TCP 2300 - 2400
    IN TCP 47624
    IN UDP 2300 - 2400
    IN UDP 47624

    SWAT3
    IN TCP 16639
    IN UDP 16638

    Ultima
    IN TCP 5001-5010 Game
    IN TCP 7775-7777 Login
    IN TCP 8888 Patch
    IN TCP 8800-8900 UO Messenger
    IN TCP 9999 Patch
    IN TCP 7875 UOMonitor

    Port 7875 is not used by the game, but by UOMonitor, which many players use to monitor server status.

    Unreal Tournament server
    IN UDP 7777 (default gameplay port)
    IN UDP 7778 (server query port
    IN UDP 7779+ (UDP 7779+ are allocated dynamically for each
    helper UdpLink objects, including UdpServerUplin
    objects. Try starting with 7779-7781 and add
    ports if needed.))
    IN UDP 27900 (server query, if master server uplink is enabled.
    Some master servers use other ports, like 27500)
    IN TCP 8080
    (Port 8080 is for UT Server Admin. In the [UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and ServerName to the IP assigned to the router from your ISP.)

    Westwood Online - C&C Tiberian Sun & Dune 2000
    Note: Westwood Online supports only one user per public IP address at any given time. Apprule courtesy of Quantus' World
    OUT TCP 4000
    IN TCP 4000
    IN UDP 1140 1234
    IN TCP 1140 1234
    OUT UDP 1140 1234
    OUT TCP 1140 1234

    ZNES
    IN UDP 7845 [Use Quake Translation if you can set it]

    Back To Top

    --------------------------------------------------------------------------------
    Common Servers
    FTP Server on your LAN
    IN TCP 21

    POP3 Mail Server on your LAN
    IN TCP 110

    SMTP Mail server" on your LAN
    IN TCP 25

    TELNET Server on your LAN
    IN TCP 23

    WEB Server on your LAN
    IN TCP 80

    Back To Top

    --------------------------------------------------------------------------------
    Other
    BAYVPN
    OUT UDP 500

    CITRIX Metaframe / ICA client
    (Watch Out! Opens a wide port range!)
    IN TCP 1494
    IN UDP 1604
    IN TCP 1023 - 5000 (NOTE: Depending on the number of clients/sessions, you can try decreasing this range, or you may need to increase it.)

    CarbonCopy32 host on your LAN
    (Watch Out! Opens a wide port range!)
    IN TCP 1680
    IN UDP 1023-1679

    Deerfield MDaemon Email Server
    IN TCP 3000
    IN TCP 3001

    Direct Connect
    (Watch Out! Opens a wide port range!)
    IN TCP 375 - 425

    FW1VPN
    OUT UDP 259

    Laplink Host
    IN TCP 1547

    Lotus Notes Server
    IN TCP 1352

    NTP (Network Time Protocol)
    OUT UDP 123
    IN UDP 123

    pcANYWHERE host on your LAN
    IN TCP 5631
    IN UDP 5632

    RAdmin (Fama Tech)
    IN TCP 4899

    Remote Anything
    FAQ page
    IN TCP 3999 - 4000
    IN UDP 3996 - 3998

    Remotely AnyWhere
    IN TCP 2000

    Remotely Possible Server
    IN TCP 799

    Shiva VPN
    (set the mobile option in the Shiva VPN client software to be your public IP address)
    OUT UDP 2233
    IN UDP 2233

    Timbuktu Pro
    IN TCP 407
    IN TCP 1417 - 1420
    IN UDP 407
    IN UDP 1417 - 1420

    Virtual Network Computing (VNC)
    IN TCP 5500
    IN TCP 5800
    IN TCP 5900

    Windows 2000 Terminal Server
    (probably also works for NT Terminal services)
    IN TCP 3389
    IN UDP 3389

類似的主題

  1. 【求助】IP分享器(PCI BRL-04FM)如何更改成HUB
    作者:ylmay 所在討論版:-- 網 路 硬 體 版
    回覆: 9
    最後發表: 2005-04-01, 09:43 AM
  2. 【求助】PCI的IP分享器跟RASPPPOE效能?
    作者:Cocktail 所在討論版:---- ADSL 軟 硬 體 技 術
    回覆: 1
    最後發表: 2004-02-25, 01:35 PM
  3. 關於pci ip分享器的問題【求助】
    作者:annaa 所在討論版:-- 網 路 硬 體 版
    回覆: 4
    最後發表: 2003-12-07, 09:38 AM
  4. 【求助】我的東森Cable+PCI IP分享器會斷線....
    作者:蟻天海殤君 所在討論版:-- Cable Modem 心 得 交 流 版
    回覆: 6
    最後發表: 2002-11-23, 05:19 PM
  5. 【求助】ip分享器+msn+xp 還是解決不了
    作者:djwx 所在討論版:-- 網 路 軟 體 討 論 二 版 (網路其他軟體)
    回覆: 1
    最後發表: 2002-08-08, 05:39 PM

 

tcp 6880

發表文章規則

  • 不可以發表新主題
  • 不可以回覆文章
  • 不可以上傳附加檔案
  • 不可以編輯自己的文章
  •